Goodridge 90˚ extended neck banjo fittings, these feature a 90˚ angle opposed to the flat faces of the banjo hole. Available to suit -03 hose with a 10mm hole to suit -03 or M10 banjo bolts. Ideal used to exit a Girling style handbrake master cylinder, taking the hose neatly down to the tunnel and on to the rear of the vehicle.
Suitable for brake and clutch lines, for use with Goodridge 600 or 700 series PTFE lined hose. With a cost effective zinc plated steel for corrosion resistance, reusable with new Goodridge brass olives, buy some HERE.
Priced individually
- -03 hose (3.5mm bore), -04 hose (5.0mm bore)
- Great for custom brake and clutch hose creation
- Suitable for performance or motorsport vehicles
- Reassemble & reuse with a new Goodridge olive
FITTING: [noun] - a part that you always attach a hose or pipe to, enabling it to be connected to another component, either directly or via an adaptor.
600 Series Reusable Fittings
- The body seals to the hose using an olive and socket as shown
- Replacement olives and sockets are available separately
